Valve Index Accessoires VR

Affichage 1-36 de 63 article(s)

side view of a notched bracket to mount on Virtual Realy gunstock rear part

In stock

Pièces de rechange

Monture pour coupelle

The magnetic bracket that holds the controller and its bottom-mounted magnetic mount on our gun frames. Add a second smooth mount to the front part of your VR gun stock (MagTube, ForceTube) to give you two possible positions for your front hand. Generally, the furthest for rifles and the closest for machine pistols. This way, you can quickly switch from...

View

In stock

Fusil et arme d'assaut

Gunstock MagTube pour Valve Index

Valve Index

MTB_IND_parent

141,00 €

Step into the virtual battlefield with confidence and dominate your opponents. Spread bullets and fear throughout the opposing team, thanks to your aiming accuracy enhanced by the MagTube gunstock. Win your games from your room to esport arena. Improve your K/D ratio. Increase your immersion in MilSim games with a physical frame.

View

-50%

In stock

Pistolet et arme à feu pour VR

Bipode pour sniper

Any HMD

BIPOD_

19,50 € 39,00 €

You see that pixel 1km away in your game? That's your target and you will hit it. Perform the best long range shot. Increase your gunstock weight for more realism and immersion. Lie on the floor or lean against a piece of furniture to add stability and feel like a real marksman.

In stock

ProVolver

Support de poignée pour le pistolet ProVolver

Any HMD

PVLR_WRIST_SUPPORT_CAR_

(2 avis)

25,00 €

Play longer sessions of intense firefight by adding a wrist support to your ProVolver haptic handgun. Also improves stability when you aim with an outstretched arm. Compatible with left and right ProVolver rear mount. Easily clip/unclip it with its magnetic bracket.

Side view of carbon MK2 adjustable shoulder stock for vr gunstock

In stock

Fusil et arme d'assaut

Crosse d'épaule MK2 ajustable

Any HMD

STOCK_STATIC_MK2_parent

(3 avis)

40,00 €

Find the perfect alignement when aiming down sight (ADS).Finetune your VR gunstock by adjusting the cheek-rest up and down.Make sure your favorite phrase doesn't become Can it wait for a bit? I am in the middle of some calibrations.

View

In stock

Coupelles bottom-mounted

Coupelles pour manettes de Valve Index

Valve Index

CUP_IND_parent

30,00 €

Slot your HMD controllers inside meticulously shaped controller mounts.Clip the magnetic ones on your MagTube, ForceTube, Starter or ProTas. Fasten them on your SwingIt Golf club or ProSaber.Switching to a new brand of VR controllers? Get a new set of controller mounts and replace the old ones.

View

In stock

Pièces de rechange

Tenon pour support de manettes

Any HMD

TENON_parent

8,00 €

The retainers are the components linking the controller mounts to the brackets.To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will see how to help you.

View

A black sling for rifle support with one point of attachement

In stock

Pistolet et arme à feu pour VR

Bandoulière pour confort et sécurité avec fusil VR

Any HMD

SLING_parent

(2 avis)

10,00 €

Add more stability when playing with a VR gunstock with additional contact points.Let it rest on your torso when you unclip the controller mounts for secondary actions.The 2 points sling can be placed on 2 sling rings or you can connect the two points to just one ring.

View

In stock

Pièces de rechange

Raccords pour les tubes

Any HMD

RACCORD_parent

8,00 €

The joints of our accessories.Some players need it to create their specific configurations.

View

In stock

Accessoires VR avec haptique

Crosse haptique ForceTube avec recul

Any HMD

STOCK_HAPTIC_FTB_parent

(1 avis)

269,00 €

Upgrade your gunstock with this impressive haptic feedback shoulder stock. Feel your game and the impact (literally) of your ingame actions.

View

-20%

In stock

Pistolet à retour de force Provolver

Pistolet haptique ProVolver pour Valve Index

Valve Index

PVLR_IND_parent

272,00 € 340,00 €

Time left

I am the Law! Feel the power of your verdicts as you doom your VR enemies. The ProVolver reproduces the recoil and rumble of your VR weapon in hand. The ProVolver is highly upgradable, from pistol to SMGs / CQB gunstock to Rifle.

View

In stock

Pièces de rechange

Tube

Any HMD

TUBE_parent

14,40 €

Easily switch from chrome to carbon set, to reduce the weight and improve the look of your accessories.Carbon tubes are 60% lighter than chrome tubes.

View

In stock

ProVolver

Extension crosse du ProVolver

Any HMD

PVLR_EXT_parent

50,00 €

Upgrade your ProVolver haptic pistol to a carbine or SMG with a shoulder stock.Combined with the front extension, you get a haptic gun stock ready to mimic your virtual rifles and assault weapons.You can even have dual haptic feedback with a ForceTube module hammering your shoulder and the ProVolver kicking in your hand.

View

In stock

Pièces de rechange

Rechange du patin ajustable pour crosse MK2

Any HMD

STOCK_STATIC_MK2_SLIDER_CAR_

10,00 €

This is spare parts for the MK2 shoulder stock: the adjustable slider.To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

In stock

ProTas

Base joystick ProTas sans coupelle pour manette

Any HMD

PTS_BASE_SOLO_parent

(1 avis)

30,00 €

This is the ProTas joystick without controller mount.To benefit from the intercompatibility of our magnetic products (MagTube, ForceTube, Starter, ProTas), you must already own the bottom-mounted magnetic controller mounts (MagCups).

View

In stock

ProVolver

Module haptique du ProVolver sans coupelle arrière

Any HMD

PVLR_MOD_EXP_CAR_

300,00 €

The ProVolver Haptic module without the controller rear mount.To be honest, there is very few reason for you to take it without its rear mount, since our warranty covers you for a long time.If you are a VR game studio, contact us directly for a dev'kit.

In stock

ProTas

Cœur flexible du joystick ProTas

Any HMD

PTS_FLEX_MAG_

10,00 €

A spare part for the ProTas joystick: the flexible core.If you are under our 2 years warranty, contact our Customer Service and we will gladly replace it.

Front view of a black plastic ring to slide over a tube to attach the shoulder strap's carabiner

In stock

Pièces de rechange

Anneau pour bandoulière

Any HMD

SP_AnneauFlex

6,00 €

This is spare part for our gunstocks: the sling ring. To be honest, you shouldn't have to buy it.We put it there to show that our products are repairable. Unless you want to customize your gunstock of course?If you are under our 2 years warranty, contact our Customer Service.

Right view of Right hand Starter vr gun stock for Valve Index without shoulder stock and Grey cups Chrome tube

In stock

PDWs et armes à feu CQB

Gun stock CQB Starter pour Valve Index

Valve Index

STA_IND_parent

49,00 €

Dominate close-range encounters with this lightweight, easy-to-handle VR gun stock. No need to improvise. Adapt and overcome any situation with its medium and long-range upgrades. Win your games from your room to esport arena. Improve your K/D ratio. Keep all your freedom for fast-paced actions.

View

In stock

ProVolver

Extension avant de ProVolver sans coupelle

Any HMD

PVLR_FRONT_EXT_NOCUP_parent

20,00 €

A replacement part for the ProVolver front mount support. Need a magnetic bottom-mounted mount (MagCup) to operate. You can purchase the ProVolver front extension with a controller mount directly.

View

In stock

Fusil et arme d'assaut

Armature de fusil sans crosse ni coupelle

Any HMD

ARMATURE_ALONE_parent

70,00 €

The bare gun stock frame, without controller mounts nor shoulder stock nor sling.Mostly for those who want to customize it. The carbon armature is 60% lighter than the chrome one.

View

In stock

ProVolver

Rail du ProVolver

Any HMD

PVLR_RAIL_parent

6,00 €

The ProVolver's rails connect the rear mount to the haptic module, while the Provolver's clamps secure this connection. The female rail is designed directly onto the rear mounts. The male rail is screwed onto the haptic module. Contact our Customer Service and we will see how to help you.

View

-20%

In stock

Avec recul et retour haptique

Fusil haptique ForceTube pour Valve Index

Valve Index

FTB_IND_parent

295,20 € 369,00 €

Time left

Feel like your avatar on the battlefield. Virtual Reality is all about immersion. Align your controllers and feel the recoil on your shoulder when you pull the trigger. With a gunstock, you are first on the scoreboard far more often. With haptic feedback, your immersion will break all records!

View

An oil flask and 8 oring and 1 smooth washer and 1 notched washer

In stock

Pistolet et arme à feu pour VR

Kit de maintenance pour gunstock

Any HMD

MAINTENANCE_KIT_

10,00 €

Looks like it's time to oil up!After prolonged (months) or intensive use of your gunstock, you may need to replace some of the gaskets. Here's what you need.

Side view of original MK1 static non-haptic grey vr gun buttstock for shoulder point of contact

In stock

Fusil et arme d'assaut

Crosse d'épaule statique MK1

Any HMD

STOCK_STATIC_MK1_parent

20,00 €

The classic shoulder stock for the MagTube or shoulder extension for the Starter and ProVolver.Simple, lightweight, sturdy.

View

In stock

Joystick et manette des gaz

Joystick ProTas pour Valve Index

Valve Index

PTS_IND_parent

40,00 €

Full ahead, maximum warp.Pilot your machine with far greater precision and comfort with this joystick.Unless you want to challenge your forearms with extra weights while battling virtual enemies or cubes?

View

In stock

Pistolet et mitraillette ProVolver

Extension avant de ProVolver avec coupelle pour Valve Index

Valve Index

PVLR_FRONT_EXT_IND_parent

47,40 €

More stability. More immersion. More possibilities.Upgrade your ProVolver with a front bracket and controller mount to hold it as an SMG.

View

In stock

Coupelle arrière de ProVolver

Coupelle arrière de ProVolver pour Valve Index

Valve Index

PVLR_REAR_CUP_IND_parent

64,00 €

Upgrade your ProVolver handgun with your VR hardware. Have you switched brands of VR controllers? Simply replace the rear mount on your ProVolver haptic module. Unclip the old one, clip the new one. It's that simple.

View

In stock

Starter

Extension SMG avec crosse pour le gunstock Starter

Any HMD

STA_EXT_parent

(1 avis)

50,00 €

Upgrade your Starter CQB gunstock to adapt to any situation. Close, mid and long-range. You will dominate them all. It transforms your one-tube stock into a two-tube stock, halfway to the MagTube with its 3 parts.

View

In stock

ProStraps

Écrou en L pour ProStraps

Any HMD

PS_Strap_Ecrou

6,00 €

This L-shaped nut is for the ProStrap attachements. You shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will see how to help you.

side view of a notched bracket for provolver shoulder extension with a transparent tube armature

In stock

Pièces de rechange

Connecteur d'extension crosse

Any HMD

STOCK_EXT_CONNECTOR_parent

19,00 €

This is a spare part for the shoulder extension upgrade for the Starter and ProVolver.If you are under our 2 years warranty, contact our Customer Service.

View

In stock

Accessoires VR avec haptique

Clé USB Bluetooth

Any HMD

USB_BT_DONGLE_

5,00 €

To pair your haptic module with your computer.We offer one with every haptic module purchased, as well as the USB-C cable.

View of Swing It VR golf club for Valve Index Carbon Armature and Grey PLA cups Left hand

In stock

Club de golf

Club de golf SWINGiT pour Valve Index

Valve Index

SWING_GOLF_IND_parent

39,00 €

Impress your friends in Walkabout with your mastery of the golf club.Practices your swing like a pro. Go for the hole-in-one.

View

In stock

ProTas

Pad adhérent du ProTas

Any HMD

PTS_PAD_

6,00 €

This adhesive pad for the ProTas base is sticky enough for the ProTas joystick to act as a wall mount for your controllers on a smooth surface.Wash it under water to renew its stickiness like day one.It leaves no traces.

In stock

Séries Signature

Crosse ajustable MK2 x VRML

Any HMD

STOCK_STATIC_STAMK2_COLLAB_VRML_

50,00 €

Trouvez l'alignement parfait lorsque vous visez en bas de la ligne de mire (ADS), tout en supportant la VR Master League ! Ajustez votre gunstock VR en réglant l'appui-joue de la crosse vers le haut et vers le bas.

Side view of the SCOPEOG collab stock MK2

In stock

MagTube

Shoulder stock MK2 x ScopeOG

Any HMD

STOCK_STATIC_STAMK2_COLLAB_SCOPEOG_

50,00 €

We’ve teamed up with ScopeOG, known for his lives on Ghosts of Tabor. Check out his precision sniper shots at over 300m with a MagTube gunstock on his TikTok, Twitch and Youtube videos. Upgrade your gunstock (MagTube or Starter with extension or ProVolver with Extension) with this adjustable MK2 shoulder stock featuring ScopeOG' signature and colors....

Affinez votre recherche (63 produits)

Effacer les filtres

Casques VR compatibles

Tous
Valve Index
(63)

Type

Haptique

Couleur

Armature

Valve Index Accessoires VR

Inscris-toi à notre newsletter et reçois un code de réduction de 10% sur ta première commande.

A propos de nous

Accessoires VR

Player corner

Business corner

©2016-2025 - ProTubeVR™ | CGV | Livraison et douanes | Garantie | Retour et remboursement