Liste des produits de la marque Any HMD

ProTubeVR has a policy of a high degree of repairability and customization. Our VR accessories are compatible with the controllers of most HMD VRs thanks to controller mounts, which you can clip on with a magnet or fasten to your accessories. In this part of our catalog, you'll find products, upgrades and spare parts that can be used whatever your HMD is.

1
2

starter extension chrome armature grey mk1 stock side view

starter extension chrome armature grey mk1 stock side view 2

In stock

Starter

Extension SMG avec crosse pour le gunstock Starter

Upgrade your Starter CQB gunstock to adapt to any situation. Close, mid and long-range. You will dominate them all. It transforms your one-tube stock into a two-tube stock, halfway to the MagTube with its 3 parts.

Découvrir maintenant

left view of a SWINGiT golf security clamp to secure the controller in the golf club handle

left view of a SWINGiT golf security clamp to secure the controller in the golf club handle 2

In stock

SWINGiT Golf

Fixations du club de golf SWINGiT

SWING_GOLF_CLAMP_CAR_

These are spare parts for our products: security clamp for the SwingIt Golf club.To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

Side view of a clamp to make the connexion between the provolver controller mount and the provolver haptic module

Side view of a clamp to make the connexion between the provolver controller mount and the provolver haptic module 2

In stock

ProVolver

Fixations du ProVolver

A pair of clamps to connect the ProVolver controller rear mount to the ProVolver haptic module.You shouldn't have to buy it. We put it there to show that our products are repairable.If you are under our 2 years warranty, contact our Customer Service and we will gladly replace them.

Découvrir maintenant

left view of oring toric joint

left view of oring toric joint 2

Pièces de rechange

Joint Torique O'ring

The toric joint (O'ring) are spare parts for our products.To be honest, you shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

Découvrir maintenant

An oil flask and 8 oring and 1 smooth washer and 1 notched washer

In stock

Pistolet et arme à feu pour VR

Kit de maintenance pour gunstock

MAINTENANCE_KIT_

Looks like it's time to oil up!After prolonged (months) or intensive use of your gunstock, you may need to replace some of the gaskets. Here's what you need.

left view of black carbon hammer spare parts for ForceTube haptic Explorer module

left view of black carbon hammer spare parts for ForceTube haptic Explorer module 2

-30%

In stock

ForceTube

Marteau du module haptique ForceTube

FTB_HAMMER_parent

12,60 € 18,00 €

Time left

This is a replacement part for our ForceTube haptic module. This is the hammer that kicks your shoulder.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

Découvrir maintenant

A ProVolver haptic module without rear cup side right view

A ProVolver haptic module without rear cup side right view 2

In stock

ProVolver

Module haptique du ProVolver sans coupelle arrière

PVLR_MOD_EXP_CAR_

The ProVolver Haptic module without the controller rear mount.To be honest, there is very few reason for you to take it without its rear mount, since our warranty covers you for a long time.If you are a VR game studio, contact us directly for a dev'kit.

side view of a notched bracket to mount on Virtual Realy gunstock rear part

side view of a notched bracket to mount on Virtual Realy gunstock rear part 2

In stock

Pièces de rechange

Monture pour coupelle

The magnetic bracket that holds the controller and its bottom-mounted magnetic mount on our gun frames. Add a second smooth mount to the front part of your VR gun stock (MagTube, ForceTube) to give you two possible positions for your front hand. Generally, the furthest for rifles and the closest for machine pistols. This way, you can quickly switch from...

Découvrir maintenant

In stock

ProTas

Pad adhérent du ProTas

This adhesive pad for the ProTas base is sticky enough for the ProTas joystick to act as a wall mount for your controllers on a smooth surface.Wash it under water to renew its stickiness like day one.It leaves no traces.

Right top view of a pair of magnets for ProTubeVR accessories with screw and nut

Right top view of a pair of magnets for ProTubeVR accessories with screw and nut 2

In stock

Pièces de rechange

Paire d'aimants

This is a spare part for our magnetic controller mounts: a pair of neodymium magnets. You shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

Découvrir maintenant

Left view of a tube connector with external notches

Left view of a tube connector with external notches 2

In stock

Pièces de rechange

Raccords pour les tubes

The joints of our accessories.Some players need it to create their specific configurations.

Découvrir maintenant

side view of a carbon black female picatini rail of three centimeters with two holes inside it

side view of a carbon black female picatini rail of three centimeters with two holes inside it 2

In stock

ProVolver

Rail du ProVolver

PVLR_RAIL_parent

The ProVolver's rails connect the rear mount to the haptic module, while the Provolver's clamps secure this connection.The female rail is designed directly onto the rear mounts. The male rail is screwed onto the haptic module. Contact our Customer Service and we will see how to help you.

Découvrir maintenant

Front view of the MK2 adjustable stock carbon black slider spare part

Front view of the MK2 adjustable stock carbon black slider spare part 2

In stock

Pièces de rechange

Rechange du patin ajustable pour crosse MK2

STOCK_STATIC_MK2_SLIDER_CAR_

This is spare parts for the MK2 shoulder stock: the adjustable slider.To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

left view of a notched washer for vr gun stock and accessories articulations

left view of a notched washer for vr gun stock and accessories articulations 2

Pièces de rechange

Rondelle

The washers facilitate the rotation of the different connector articulations and protect them. To be honest, you shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

Découvrir maintenant

left view of black carbon butt plate spare parts for ForceTube haptic Explorer module

left view of black carbon butt plate spare parts for ForceTube haptic Explorer module 2

-30%

In stock

ForceTube

Semelle du module haptique ForceTube

FTB_BUTT_PLATE_parent

12,60 € 18,00 €

Time left

This is a replacement part for our ForceTube haptic module: the part pressing on your shoulder when aiming and guiding the hammer.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

Découvrir maintenant

Left view of provolver carbon wrist support with bracket

Left view of provolver carbon wrist support with bracket 2

In stock

ProVolver

Support de poignée pour le pistolet ProVolver

PVLR_WRIST_SUPPORT_CAR_

Play longer sessions of intense firefight by adding a wrist support to your ProVolver haptic handgun. Also improves stability when you aim with an outstretched arm. Compatible with left and right ProVolver rear mount. Easily clip/unclip it with its magnetic bracket.

Left view of a provolver handgun wrist support spare part without magnetic bracket

Left view of a provolver handgun wrist support spare part without magnetic bracket 2

In stock

ProVolver

Support de poignée sans monture pour le ProVolver

PVLR_STAB_SPARE_CAR_

The ProVolver Wrist support is composed of a 'wrist handle' (this spare part) and a bracket.Easily replace the handle.For left and right hand.

the rear view of a notched magnetic tenon with a sight on the magnet

the rear view of a notched magnetic tenon with a sight on the magnet 2

In stock

Pièces de rechange

Tenon pour support de manettes

The retainers are the components linking the controller mounts to the brackets.To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will see how to help you.

Découvrir maintenant

Left view of a set of chrome tubes composed of 130mm and 200mm and 250mm tubes for Pro Tube Gun stock

Left view of a set of chrome tubes composed of 130mm and 200mm and 250mm tubes for Pro Tube Gun stock 2

In stock

Pièces de rechange

Tube

Easily switch from chrome to carbon set, to reduce the weight and improve the look of your accessories.Carbon tubes are 60% lighter than chrome tubes.

Découvrir maintenant

Affichage 25-43 de 43 article(s)

1
2