Liste des produits de la marque Any HMD

ProTubeVR has a policy of a high degree of repairability and customization. Our VR accessories are compatible with the controllers of most HMD VRs thanks to controller mounts, which you can clip on with a magnet or fasten to your accessories. In this part of our catalog, you'll find products, upgrades and spare parts that can be used whatever your HMD is.

Affichage 25-48 de 62 article(s)

Front view of the black flexible core of the ProTas joystick

In stock

ProTas

Cœur flexible du joystick ProTas

A spare part for the ProTas joystick: the flexible core.If you are under our 2 years warranty, contact our Customer Service and we will gladly replace it.

Side view of L-nut for prostraps attachement

In stock

ProStraps

Écrou en L pour ProStraps

This L-shaped nut is for the ProStrap attachements. You shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will see how to help you.

left view of black carbon butt pad spare parts for ForceTube haptic Explorer module

In stock

ForceTube

Ensemble semelle et marteau du module ForceTube

FTB_BUTT_PAD_ASSEMBLY_parent

This is a replacement part for our ForceTube haptic module. This is the part that presses on your shoulder and hammers when the module kicks.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

Side view of a magnetic front support to put a left-hand controller mount for a right-handed ProVolver rear-cup

In stock

ProVolver

Extension avant de ProVolver sans coupelle

PVLR_FRONT_EXT_NOCUP_parent

A replacement part for the ProVolver front mount support. Need a magnetic bottom-mounted mount (MagCup) to operate. You can purchase the ProVolver front extension with a controller mount directly.

View

Right view of a SMG shoulder stock upgrade for Provolver haptic pistol with chrome armature and grey static MK1 stock

In stock

ProVolver

Extension crosse du ProVolver

PVLR_EXT_parent

Upgrade your ProVolver haptic pistol to a carbine or SMG with a shoulder stock.Combined with the front extension, you get a haptic gun stock ready to mimic your virtual rifles and assault weapons.You can even have dual haptic feedback with a ForceTube module hammering your shoulder and the ProVolver kicking in your hand.

View

starter extension chrome armature grey mk1 stock side view

In stock

Starter

Extension SMG avec crosse pour le gunstock Starter

(1 avis)

Upgrade your Starter CQB gunstock to adapt to any situation. Close, mid and long-range. You will dominate them all. It transforms your one-tube stock into a two-tube stock, halfway to the MagTube with its 3 parts.

View

left view of a SWINGiT golf security clamp to secure the controller in the golf club handle

In stock

SWINGiT Golf

Fixations du club de golf SWINGiT

SWING_GOLF_CLAMP_CAR_

These are spare parts for our products: security clamp for the SwingIt Golf club.To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

Side view of a clamp to make the connexion between the provolver controller mount and the provolver haptic module

In stock

ProVolver

Fixations du ProVolver

A pair of clamps to connect the ProVolver controller rear mount to the ProVolver haptic module.You shouldn't have to buy it. We put it there to show that our products are repairable.If you are under our 2 years warranty, contact our Customer Service and we will gladly replace them.

View

Foregrip for the ProBolter Gun Module image 1

In stock

ProBolter

Foregrip for ProBolter Gun Module

PROBOLTER_GUN_MOD_FOREGRIP

You shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

Handle for the ProBolter Gun Module image 1

In stock

ProBolter

Handle for ProBolter Gun Module

PROBOLTER_GUN_MOD_HANDLE

You shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

left view of oring toric joint

Pièces de rechange

Joint Torique O'ring

The toric joint (O'ring) are spare parts for our products.To be honest, you shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

View

An oil flask and 8 oring and 1 smooth washer and 1 notched washer

In stock

Pistolet et arme à feu pour VR

Kit de maintenance pour gunstock

MAINTENANCE_KIT_

Looks like it's time to oil up!After prolonged (months) or intensive use of your gunstock, you may need to replace some of the gaskets. Here's what you need.

left view of black carbon hammer spare parts for ForceTube haptic Explorer module

In stock

ForceTube

Marteau du module haptique ForceTube

FTB_HAMMER_parent

This is a replacement part for our ForceTube haptic module. This is the hammer that kicks your shoulder.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

A ProVolver haptic module without rear cup side right view

In stock

ProVolver

Module haptique du ProVolver sans coupelle arrière

PVLR_MOD_EXP_CAR_

The ProVolver Haptic module without the controller rear mount.To be honest, there is very few reason for you to take it without its rear mount, since our warranty covers you for a long time.If you are a VR game studio, contact us directly for a dev'kit.

side view of a notched bracket to mount on Virtual Realy gunstock rear part

In stock

Pièces de rechange

Monture pour coupelle

The magnetic bracket that holds the controller and its bottom-mounted magnetic mount on our gun frames. Add a second smooth mount to the front part of your VR gun stock (MagTube, ForceTube) to give you two possible positions for your front hand. Generally, the furthest for rifles and the closest for machine pistols. This way, you can quickly switch from...

View

Muzzle of the ProBolter Gun Module image 1

In stock

ProBolter

Muzzle for ProBolter Gun Module

PROBOLTER_GUN_MOD_MUZZLE

You shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

Notched adaptator for the ProBolter Heavy Extension image 1

In stock

ProBolter

Notched Adaptator for ProBolter Heavy

PROBOLTER_HEAVY_EXT_NOTCHED_ADAPTATOR

You shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

In stock

ProTas

Pad adhérent du ProTas

This adhesive pad for the ProTas base is sticky enough for the ProTas joystick to act as a wall mount for your controllers on a smooth surface.Wash it under water to renew its stickiness like day one.It leaves no traces.

Right top view of a pair of magnets for ProTubeVR accessories with screw and nut

In stock

Pièces de rechange

Paire d'aimants

This is a spare part for our magnetic controller mounts: a pair of neodymium magnets. You shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

Left view of Pictanni rail 98x21mm

ProBolter

Picatinni Rail

RAIL_PICATINNI_parent

You shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

View

Haptic module for the ProBolter Gun image 1

ProBolter

ProBolter Gun Haptic module

PROBOLTER_GUN_MOD

A spare haptic module for ProBolter Rear controller mount. Not compatible with the ProVolver one. Feature a Storm 12 joules haptic device, to simulate a wide range of recoil and power effects.

View

Side view of the ProBolter shoulder extension with Storm Haptic module

In stock

ProBolter

ProBolter Heavy Shoulder Extension

PROBOLTER_HEAVY_EXT

The ProBolter Heavy Shoulder Extension is a stock upgrade that transforms the ProBolter Gun into the ProBolter Heavy, enhancing stability, control, and immersion for VR gaming. This stock upgrade seamlessly attaches to your ProBolter Gun, converting it into the ProBolter Heavy. Designed for professionals and enthusiasts, the extension provides enhanced...

Left view of a tube connector with external notches

In stock

Pièces de rechange

Raccords pour les tubes

The joints of our accessories.Some players need it to create their specific configurations.

View

side view of a carbon black female picatini rail of three centimeters with two holes inside it

In stock

ProVolver

Rail du ProVolver

PVLR_RAIL_parent

The ProVolver's rails connect the rear mount to the haptic module, while the Provolver's clamps secure this connection. The female rail is designed directly onto the rear mounts. The male rail is screwed onto the haptic module. Contact our Customer Service and we will see how to help you.

View

1
2
3

Product added to wishlist